📅 Free live lesson: Tuesday 17th NovemberSave your free place →

Similar Shapes

Videos

Using the Volume Scale Factor of Similar Solids
Grade 7Higher Only
Converting an Area Ratio into a Length Ratio
Grade 7Higher Only

Notes

Intro

Similar shapes are the same shape but different sizes: one is an enlargement of the other. Exam questions ask you to find the scale factor and then use it to work out missing lengths, areas or volumes.

1Calculating Scale Factor

The scale factor tells you how many times bigger (or smaller) one shape is than the other. You find it by dividing a length on the new shape by the matching length on the original shape.

How to Do It
  1. Find a pair of matching sides where you know both lengths.
  2. Make sure both lengths are in the same units.
  3. Divide the new length by the original length.
  4. Check that the scale factor is bigger than 1 if the shape gets bigger, and less than 1 if it gets smaller.
Common Mistake

Divide the right way round: new length divided by original length. Going from the flag to the smaller badge must give a scale factor less than 1.

Worked Example

A flag is 80 cm long and 60 cm wide.
A badge is a reduction of the flag.
The badge is 16 cm long.
(a) Write the scale factor of the reduction as a fraction in its simplest form.
(b) Work out the width of the badge.

(a) Scale factor = 16 ÷ 80 = dfrac1680
dfrac1680 = dfrac15
(b) Width of badge = 60 × dfrac15 = 12
Answer: (a) dfrac15 (b) 12 cm
Practise This Key Skill →

2Similar Side Lengths

Once you know the scale factor, you can find any missing side. Multiply to go from the small shape to the big shape, and divide to go from the big shape to the small one.

How to Do It
  1. Match up the sides of the two shapes, drawing the two triangles separately if they overlap.
  2. Work out the scale factor from a pair of matching sides you know.
  3. Multiply the matching side by the scale factor to find a side on the bigger shape.
  4. Divide by the scale factor to find a side on the smaller shape.
Common Mistake

When one triangle sits inside the other, use the whole side of the big triangle. Here the matching sides are AB and AC, so use 10 cm, not BC = 6 cm.

Worked Example

BD is parallel to CE.
AB = 4 cm
BC = 6 cm
BD = 5 cm
Work out the length of CE.

The small triangle is ABD and the big triangle is ACE
AC = 4 + 6 = 10 cm
Scale factor = 10 ÷ 4 = 2.5
CE = 2.5 × 5 = 12.5
Answer: 12.5 cm
Practise This Key Skill →

3Similar Areas & Volumes

When lengths are multiplied by a scale factor k, areas are multiplied by k² and volumes are multiplied by k³.

How to Do It
  1. Find the length scale factor, k.
  2. Square it to get the area scale factor, k².
  3. Cube it to get the volume scale factor, k³.
  4. Work backwards with a square root or a cube root if you are given two areas or two volumes.
Common Mistake

Do not use the length scale factor for an area or a volume. If the lengths double, the area is 4 times as big and the volume is 8 times as big.

Worked Example

Two solids are similar.
Their volumes are 125 cm³ and 512 cm³.
The surface area of the smaller solid is 150 cm².
Work out the surface area of the larger solid.

Volume scale factor = 512 ÷ 125
Length scale factor = sqrt[3]512 ÷ 125 = dfrac85 = 1.6
Area scale factor = 1.6² = 2.56
Surface area = 150 × 2.56 = 384
Answer: 384 cm²
Practise This Key Skill →

4Scale Drawings

A scale drawing or map shows something real at a smaller size. The scale, such as 1 cm to 5 km or 1 : 150, tells you how drawing lengths and real lengths are linked.

How to Do It
  1. Read the scale to see what 1 cm on the drawing stands for.
  2. Multiply by the scale to go from the drawing to real life.
  3. Divide by the scale to go from real life to the drawing.
  4. Convert the units at the end, or before you start, so the answer is in the units asked for.
Common Mistake

A ratio scale such as 1 : 150 uses the same units on both sides, so 1 cm stands for 150 cm, not 150 m. Convert between centimetres and metres as a separate step.

Worked Example

A model of a bridge is made with a scale of 1 : 150
The model is 36 cm long.
(a) Work out the real length of the bridge in metres.
(b) The real bridge is 12 m high.
Work out the height of the model in centimetres.

(a) Real length = 36 × 150 = 5400 cm
5400 ÷ 100 = 54 m
(b) 12 m = 12 × 100 = 1200 cm
Model height = 1200 ÷ 150 = 8 cm
Answer: (a) 54 m (b) 8 cm
Practise This Key Skill →
Takeaways
  • Scale factor = new length ÷ original length, using matching sides.
  • Similar shapes have equal angles, and all their sides are multiplied by the same scale factor.
  • Length scale factor k, area scale factor k², volume scale factor k³.
  • Keep units the same before you divide.
FREE LIVE LESSON

Join the Next
Free GCSE
Maths Lesson

  • Tuesday 17th November
  • Live with Matt, free
  • For Year 9, 10, 11 and resits
Matthew EberleFounder of MyGCSEMaths
Trustpilot
4.9
Excellent · 174 reviews
Google
4.9
1,069 reviews
Save your free place
I'm a
Year group
Tier

Free. We'll email you about the lesson and MyGCSEMaths; unsubscribe any time. Privacy policy

📅 Free live lesson: Tuesday 17th NovemberSave your free place →

Similar Shapes

Videos

Using the Volume Scale Factor of Similar Solids
Grade 7Higher Only
Converting an Area Ratio into a Length Ratio
Grade 7Higher Only

Notes

Intro

Similar shapes are the same shape but different sizes: one is an enlargement of the other. Exam questions ask you to find the scale factor and then use it to work out missing lengths, areas or volumes.

1Calculating Scale Factor

The scale factor tells you how many times bigger (or smaller) one shape is than the other. You find it by dividing a length on the new shape by the matching length on the original shape.

How to Do It
  1. Find a pair of matching sides where you know both lengths.
  2. Make sure both lengths are in the same units.
  3. Divide the new length by the original length.
  4. Check that the scale factor is bigger than 1 if the shape gets bigger, and less than 1 if it gets smaller.
Common Mistake

Divide the right way round: new length divided by original length. Going from the flag to the smaller badge must give a scale factor less than 1.

Worked Example

A flag is 80 cm long and 60 cm wide.
A badge is a reduction of the flag.
The badge is 16 cm long.
(a) Write the scale factor of the reduction as a fraction in its simplest form.
(b) Work out the width of the badge.

(a) Scale factor = 16 ÷ 80 = dfrac1680
dfrac1680 = dfrac15
(b) Width of badge = 60 × dfrac15 = 12
Answer: (a) dfrac15 (b) 12 cm
Practise This Key Skill →

2Similar Side Lengths

Once you know the scale factor, you can find any missing side. Multiply to go from the small shape to the big shape, and divide to go from the big shape to the small one.

How to Do It
  1. Match up the sides of the two shapes, drawing the two triangles separately if they overlap.
  2. Work out the scale factor from a pair of matching sides you know.
  3. Multiply the matching side by the scale factor to find a side on the bigger shape.
  4. Divide by the scale factor to find a side on the smaller shape.
Common Mistake

When one triangle sits inside the other, use the whole side of the big triangle. Here the matching sides are AB and AC, so use 10 cm, not BC = 6 cm.

Worked Example

BD is parallel to CE.
AB = 4 cm
BC = 6 cm
BD = 5 cm
Work out the length of CE.

The small triangle is ABD and the big triangle is ACE
AC = 4 + 6 = 10 cm
Scale factor = 10 ÷ 4 = 2.5
CE = 2.5 × 5 = 12.5
Answer: 12.5 cm
Practise This Key Skill →

3Similar Areas & Volumes

When lengths are multiplied by a scale factor k, areas are multiplied by k² and volumes are multiplied by k³.

How to Do It
  1. Find the length scale factor, k.
  2. Square it to get the area scale factor, k².
  3. Cube it to get the volume scale factor, k³.
  4. Work backwards with a square root or a cube root if you are given two areas or two volumes.
Common Mistake

Do not use the length scale factor for an area or a volume. If the lengths double, the area is 4 times as big and the volume is 8 times as big.

Worked Example

Two solids are similar.
Their volumes are 125 cm³ and 512 cm³.
The surface area of the smaller solid is 150 cm².
Work out the surface area of the larger solid.

Volume scale factor = 512 ÷ 125
Length scale factor = sqrt[3]512 ÷ 125 = dfrac85 = 1.6
Area scale factor = 1.6² = 2.56
Surface area = 150 × 2.56 = 384
Answer: 384 cm²
Practise This Key Skill →

4Scale Drawings

A scale drawing or map shows something real at a smaller size. The scale, such as 1 cm to 5 km or 1 : 150, tells you how drawing lengths and real lengths are linked.

How to Do It
  1. Read the scale to see what 1 cm on the drawing stands for.
  2. Multiply by the scale to go from the drawing to real life.
  3. Divide by the scale to go from real life to the drawing.
  4. Convert the units at the end, or before you start, so the answer is in the units asked for.
Common Mistake

A ratio scale such as 1 : 150 uses the same units on both sides, so 1 cm stands for 150 cm, not 150 m. Convert between centimetres and metres as a separate step.

Worked Example

A model of a bridge is made with a scale of 1 : 150
The model is 36 cm long.
(a) Work out the real length of the bridge in metres.
(b) The real bridge is 12 m high.
Work out the height of the model in centimetres.

(a) Real length = 36 × 150 = 5400 cm
5400 ÷ 100 = 54 m
(b) 12 m = 12 × 100 = 1200 cm
Model height = 1200 ÷ 150 = 8 cm
Answer: (a) 54 m (b) 8 cm
Practise This Key Skill →
Takeaways
  • Scale factor = new length ÷ original length, using matching sides.
  • Similar shapes have equal angles, and all their sides are multiplied by the same scale factor.
  • Length scale factor k, area scale factor k², volume scale factor k³.
  • Keep units the same before you divide.
FREE LIVE LESSON

Join the Next
Free GCSE
Maths Lesson

  • Tuesday 17th November
  • Live with Matt, free
  • For Year 9, 10, 11 and resits
Matthew EberleFounder of MyGCSEMaths
Save your free place
I'm a
Year group
Tier

Free. We'll email you about the lesson and MyGCSEMaths; unsubscribe any time. Privacy policy

Trustpilot
4.9
Excellent · 174 reviews
Google
4.9
1,069 reviews
📅 Free lesson: Tue 17th NovSave your place →

Similar Shapes

Videos

Using the Volume Scale Factor of Similar Solids
Grade 7Higher Only
Converting an Area Ratio into a Length Ratio
Grade 7Higher Only

Notes

Intro

Similar shapes are the same shape but different sizes: one is an enlargement of the other. Exam questions ask you to find the scale factor and then use it to work out missing lengths, areas or volumes.

1Calculating Scale Factor

The scale factor tells you how many times bigger (or smaller) one shape is than the other. You find it by dividing a length on the new shape by the matching length on the original shape.

How to Do It
  1. Find a pair of matching sides where you know both lengths.
  2. Make sure both lengths are in the same units.
  3. Divide the new length by the original length.
  4. Check that the scale factor is bigger than 1 if the shape gets bigger, and less than 1 if it gets smaller.
Common Mistake

Divide the right way round: new length divided by original length. Going from the flag to the smaller badge must give a scale factor less than 1.

Worked Example

A flag is 80 cm long and 60 cm wide.
A badge is a reduction of the flag.
The badge is 16 cm long.
(a) Write the scale factor of the reduction as a fraction in its simplest form.
(b) Work out the width of the badge.

(a) Scale factor = 16 ÷ 80 = dfrac1680
dfrac1680 = dfrac15
(b) Width of badge = 60 × dfrac15 = 12
Answer: (a) dfrac15 (b) 12 cm
Practise This Key Skill →

2Similar Side Lengths

Once you know the scale factor, you can find any missing side. Multiply to go from the small shape to the big shape, and divide to go from the big shape to the small one.

How to Do It
  1. Match up the sides of the two shapes, drawing the two triangles separately if they overlap.
  2. Work out the scale factor from a pair of matching sides you know.
  3. Multiply the matching side by the scale factor to find a side on the bigger shape.
  4. Divide by the scale factor to find a side on the smaller shape.
Common Mistake

When one triangle sits inside the other, use the whole side of the big triangle. Here the matching sides are AB and AC, so use 10 cm, not BC = 6 cm.

Worked Example

BD is parallel to CE.
AB = 4 cm
BC = 6 cm
BD = 5 cm
Work out the length of CE.

The small triangle is ABD and the big triangle is ACE
AC = 4 + 6 = 10 cm
Scale factor = 10 ÷ 4 = 2.5
CE = 2.5 × 5 = 12.5
Answer: 12.5 cm
Practise This Key Skill →

3Similar Areas & Volumes

When lengths are multiplied by a scale factor k, areas are multiplied by k² and volumes are multiplied by k³.

How to Do It
  1. Find the length scale factor, k.
  2. Square it to get the area scale factor, k².
  3. Cube it to get the volume scale factor, k³.
  4. Work backwards with a square root or a cube root if you are given two areas or two volumes.
Common Mistake

Do not use the length scale factor for an area or a volume. If the lengths double, the area is 4 times as big and the volume is 8 times as big.

Worked Example

Two solids are similar.
Their volumes are 125 cm³ and 512 cm³.
The surface area of the smaller solid is 150 cm².
Work out the surface area of the larger solid.

Volume scale factor = 512 ÷ 125
Length scale factor = sqrt[3]512 ÷ 125 = dfrac85 = 1.6
Area scale factor = 1.6² = 2.56
Surface area = 150 × 2.56 = 384
Answer: 384 cm²
Practise This Key Skill →

4Scale Drawings

A scale drawing or map shows something real at a smaller size. The scale, such as 1 cm to 5 km or 1 : 150, tells you how drawing lengths and real lengths are linked.

How to Do It
  1. Read the scale to see what 1 cm on the drawing stands for.
  2. Multiply by the scale to go from the drawing to real life.
  3. Divide by the scale to go from real life to the drawing.
  4. Convert the units at the end, or before you start, so the answer is in the units asked for.
Common Mistake

A ratio scale such as 1 : 150 uses the same units on both sides, so 1 cm stands for 150 cm, not 150 m. Convert between centimetres and metres as a separate step.

Worked Example

A model of a bridge is made with a scale of 1 : 150
The model is 36 cm long.
(a) Work out the real length of the bridge in metres.
(b) The real bridge is 12 m high.
Work out the height of the model in centimetres.

(a) Real length = 36 × 150 = 5400 cm
5400 ÷ 100 = 54 m
(b) 12 m = 12 × 100 = 1200 cm
Model height = 1200 ÷ 150 = 8 cm
Answer: (a) 54 m (b) 8 cm
Practise This Key Skill →
Takeaways
  • Scale factor = new length ÷ original length, using matching sides.
  • Similar shapes have equal angles, and all their sides are multiplied by the same scale factor.
  • Length scale factor k, area scale factor k², volume scale factor k³.
  • Keep units the same before you divide.
FREE LIVE LESSON

Join the Next Free
GCSE Maths Lesson

  • Tuesday 17th November
  • Live with Matt, free
  • For Year 9, 10, 11 and resits
Matthew EberleFounder of MyGCSEMaths
Save your free place
I'm a
Year group
Tier

Free. We'll email you about the lesson and MyGCSEMaths; unsubscribe any time. Privacy policy

Trustpilot
4.9
Excellent · 174 reviews
Google
4.9
1,069 reviews